Chapter 2 Avaya P330-Ml Layer 2 Cli Commands - Avaya P330-ML-ML Reference Manual

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
clear dynamic vlans
User level: privileged, supervisor.
This command is available on the P330-ML-ML only.
Use the clear dynamic vlans command to clear dynamically learned VLANs.
Only the VLANs learned by the switch from incoming traffic are cleared using this
command.
The syntax for this command is:
clear dynamic vlans
Example:
P330-N# clear dynamic vlans
This command will delete all the vlans that were
dynamically learned by the device - do you want to continue
(Y/N)? y
Dynamic vlans were deleted from device tables
clear log
User level: privileged, supervisor.
Use the clear log command to delete the log file of a switch.
The syntax for this command is:
clear log [<module]
module
(Optional)
Example:
P330-N# clear log
Cleared all logfiles.
clear logging file
User level: privileged, supervisor.
Use the clear logging file command to delete the log file and open an empty
one.
The syntax for this command is:
clear logging file
10
Number of switch (1...10)
Avaya P330-ML Reference Guide