Event Log; Exit - Avaya P330-ML-ML Reference Manual

Example:
Router-N(configure)# erase startup-config

event log

Use the event log command to display a list of the event messages.
The event messages shown are encrypted and are reserved for Avaya use only.
The syntax for this command is:
event log [<num>]
num
Example:
Router-N(configure)# event log
The following message is for internal use only!!!
Z,o(9?+.ig?aDZ_Z0"Dw"ZHlJZZ,300R3333aDZt?(Z
Zt?(Z?qDZ?gXZ;z=WZYLd{z5^=}ZHt!Z^YYE
Z33D@3D3YDRTDQTD3wZ'E~MZw@T:@T:_@:_QZ~NZz'oYPZw
Z,o(9?+.ig?aDZ"Z0"D3"ZHlJZZ,300R3333aDZt?(Z
Zt?(Z?qDZ?gXZ;z=WZYLd{z5^=}ZHt!Z^YYE
Z33D@3D3YDRTDQTD3wZ'E~MZw@T:@T:_@:_QZ~NZz'oYPZw
Z,=H^zNaDZ0Z3D33ZHlJZZ,303"3333aDZ?lUl9ojoiZ Z("""?
A\Zlit?ign
Z,!AoaDZwZ0Q_D_QZHlJZZ,303w3333aDZgjKZ ZZ}>}N=Z{~/Z5{}^E}Y
Done!

exit

User level: user, privileged, supervisor
Use the exit command to return to the previous context or disconnect from the
switch.
The syntax for this command is:
exit
Avaya P330-ML Reference Guide
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Number of event messages to display (max=30)
223