Show Snmp Group - Avaya P330-ML-ML Reference Manual

Output fields:
Field
EngineId
EngineBoots

show snmp group

User level: supervisor
Use then show snmp group command to display SNMP groups.
The syntax for this command is:
show snmp group [<group-name>]
group-name
(optional)
Avaya P330-ML Reference Guide
Chapter 2
Description
The SNMP engine ID.
The number of times the SNMP engine has been started or
reinitialized.
]
The name of a group to display. If no group is
specified, all groups are displayed.
Avaya P330-ML Layer 2 CLI Commands
183