Ip Vrrp Address - Avaya P330-ML-ML Reference Manual

ip vrrp
User level: privileged, supervisor.
Use the ip vrrp command to create a virtual router on the interface.
Use the no ip vrrp command to delete a virtual router.
The syntax for this command is:
[no] ip vrrp <vr-id>
vr-id
Example:
Router-N(configure-if:marketing) # ip vrrp 1
Done!

ip vrrp address

User level: privileged, supervisor.
Use the ip vrrp address command to assign an IP address to the virtual
router.
Use the no ip vrrp address command to remove an IP address from a virtual
router.
The syntax for this command is:
[no] ip vrrp <vr-id> address <ip-address>
vr-id
ip-address
Example:
To assign address 10.0.1.2 to virtual router 1:
Router-N(configure-if:marketing) # ip vrrp 1 address
10.0.1.2
Done!
Avaya P330-ML Reference Guide
Chapter 3
Virtual Router ID (1-255)
Virtual Router ID (1-255)
The IP address to be assigned to the virtual router.
Avaya P330-ML Layer 3 CLI Commands
287