Disconnect Ssh - Avaya P330-ML-ML Reference Manual

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Output Fields:
Field
M#
file
ver num
file type
file location
file description
If N/A is displayed for the EW_Archive file, this means that the Device
Manager software is not loaded correctly. Download the Device Manager
software again.

disconnect ssh

User level: supervisor
Use the disconnect ssh command to disconnect an SSH session.
34
Description
The switch number
There are several files loaded into the switch's memory:
• module-config – file which contains the configuration
settings made to this switch
• stack-config – file which contains the configuration settings
made at the stack level (for example IP address of the stack)
• EW_Archive – file which contains the Device Manager
(Embedded Web) software
• Booter_Image - file containing the booter code executed
after rest. This file Can't be replaced by the user.
• startup-config - file which contains the startup (saved in
NVRAM) configuration for policy and routing in the P330-
ML-ML, P333R, and P333R-LB
• running-config - file which contains the running (currently
active) configuration for policy and routing in the P330-ML-
ML, P333R, and P333R-LB
S/W Version number – relevant only for Device Manager and
Booter image.
There are several file types:
• Running Conf – the configuration currently in use.
• Startup-config - startup configuration for policy and routing
in the P330-ML-ML, P333R, and P333R-LB
• SW boot image - Booter file
• SW Web Image – Device Manager S/W archive file
Type of internal memory into which the file is loaded
Description of the file
Avaya P330-ML Reference Guide