Show Ppp Authentication - Avaya P330-ML-ML Reference Manual

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
image version of P333T-PWR switches in the stack or a specific switch.
The syntax of this command is:
show powerinline image version [<module-number>]
If you do not specify a number, then the software version for all the P333T-PWR
switches is shown.
module-
number
Example:
P330-ML-2> show powerinline image version
Mod
---
1
4
5
Example:
P330-ML-2> show powerinline 3
Mod
---
3

show ppp authentication

User level: user, privileged, supervisor
Use the show ppp authentication command to display the authentication
method used for PPP sessions.
The syntax for this command is:
show ppp authentication
Example:
P330-N>show ppp authentication
PPP Authentication Parameters:
------------------------------
Incoming:
172
Number of the module for which you want to display the
current powerline image version
Image Version
-------------
1.2.9
1.2.9
1.2.9
Image Version
-------------
1.2.9
CHAP
Avaya P330-ML Reference Guide