Copy Module-Config Tftp - Avaya P330-ML-ML Reference Manual

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
The syntax for this command is:
copy module-config scp <filename> <ip> <mod_num>
filename
ip
mod-num
Example:
P330-N# copy module-config scp c:\config\switch1.cfg 192.168.49.10 5
Username: 330user
Password:
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show upload status' command
********************************************************************
* If you are currently running the P330-ML Device Manager
application,*
* it is recommended to exit from it before performing configuration*
* download operations.
********************************************************************

copy module-config tftp

User level: supervisor
Use the copy module-config tftp command to upload the switch-level
parameters from the current NVRAM running configuration into a file via TFTP.
The syntax for this command is:
copy module-config tftp <filename> <ip> <mod_num>
filename
ip
mod-num
16
The file name (full path)
The IP address of the SCP server
The switch number
The file name (full path)
The IP address of the TFTP server
The switch number
Avaya P330-ML Reference Guide
*