Copy Scp Module-Config - Avaya P330-ML-ML Reference Manual

Example:
Router-N(super)# copy running-config tftp c:\P330-
ML\startup.cfg 149.49.100.41
Example: (for Unix):
Router-N(super)# copy running-config tftp /folder/P330-ML/
startup.cfg 149.49.100.41

copy scp module-config

User level: privileged, supervisor.
Use the copy scp module-config command to download a module
configuration to the device via SCP.
Only parameters that differ from the factory default settings for the switch are
included in the configuration file. Therefore, it is important to reinitialize the
NVRAM to the factory default settings before downloading configuration files
to the switch. To reinitialize the NVRAM, run the nvram initialize
command.
The syntax for this command is:
copy scp module-config <filename> <ip>
filename
ip
Example (for Windows):
P330-N# copy scp module-config c:\P330-ML\module.cfg
149.49.100.41
Example: (for Unix):
P330-N# copy scp module-config /folder/P330-ML/module.cfg
149.49.100.41
Avaya P330-ML Reference Guide
Chapter 3
Source file name on the SCP server (full path).
The ip address of the SCP server.
Avaya P330-ML Layer 3 CLI Commands
219