Terminal; Username - Avaya P330-ML-ML Reference Manual

The syntax for this command is:
telnet <ip-address> [<port-number>]
ip-address
port-number
Example:
P330-N>telnet 149.22.38.127

terminal

User level: user, privileged, supervisor
Use the terminal width and terminal length commands to set the width
and length of the terminal display in characters.
The syntax for this command is:
terminal {width|length} [<characters>]
Example:
Router-N> terminal width 80
terminal width: 80

username

User level: supervisor
Adds a local user account.
By default there is only a single user account, named 'root', with password
'root', which access the administrator level. You cannot delete this basic user
account, nor can you modify its access level. You can modify its basic password.
The syntax for this command is:
username <name> password <passwd> access-type {read-only|read-
write|admin}
name
passwd
access-type
Avaya P330-ML Reference Guide
Chapter 2
The IP address of the remote host.
The port number over which to open the Telnet connection.
New user name (minimum four characters)
User's password (minimum four characters)
Access type definition - read only, read-write or
administrator
Avaya P330-ML Layer 2 CLI Commands
209