Copy Module-Config Tftp; Copy Running-Config Scp - Avaya P330-ML-ML Reference Manual

copy module-config tftp

Use the copy module-config tftp command to upload the switch-level
parameters from the current NVRAM running configuration into a file via TFTP.
The syntax for this command is:
copy module-config tftp <filename> <ip> <mod_num>
filename
ip
mod-num
Example:
P330-N# copy module-config tftp c:\config\switch1.cfg 192.168.49.10 5
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show tftp upload status' command
********************************************************************
* If you are currently running the P330-ML Device Manager
application,*
* it is recommended to exit from it before performing configuration*
* download operations.
********************************************************************

copy running-config scp

Use the copy running-config scp command to upload the current
switch-level parameters from the current NVRAM running configuration into a file
via SCP.
The syntax for this command is:
copy running-config scp <filename> <ip> <mod_num>
filename
ip
mod-num
Avaya P330-ML Reference Guide
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
The file name (full path)
The IP address of the TFTP server
The switch number
The file name (full path)
The IP address of the SCP server
The switch number
*
217