Show Trunk - Avaya P330-ML-ML Reference Manual

The syntax for this command is:
show timezone
Example:
P330-N>show timezone
Timezone set to 'GMT', offset from UTC is 0 hours

show trunk

User level: user, privileged, supervisor
Use the show trunk command to display VLAN tagging information for the
switch or a specified module or port.
The syntax for this command is:
show trunk [<mod_num>[/<port_num>-<port_num>]]
mod_num
(Optional)
port_num
(Optional)
Avaya P330-ML Reference Guide
Chapter 2
Number of the switch. If you do not specify a number, all
switches in the stack are shown.
Number of the port on the switch. If you do not specify a
number, all ports on the specificity switch are shown.
You can specify a port range.
Avaya P330-ML Layer 2 CLI Commands
195