Table of Contents
Advertisement
The syntax for this command is:
snmp-server informs retries <retries-num> timeout <seconds>
retries-num
seconds
Example:
P330-N>snmp-server informs retries 5 timeout 30
Done!
snmp-server remote-user
User level: supervisor
Use the snmp-server remote user command to configure a remote-user as a
target for SNMP notifications.
The syntax for this command is:
snmp-server remote-user <username> <engineID> <groupname>
{ v1 | v2c | v3 } [auth {md5 | sha} <auth-password>
[priv des56 <priv-password>]]
username
engineID
groupname
v1, v2c, v3
auth
(Optional)
md5, sha
priv-
password
Avaya P330-ML Reference Guide
Chapter 2
Maximum number of times to resend an inform request.
Number of seconds to wait for an acknowledgment before
resending. The default is 3.
Variable that specifies the name of the SNMP user. The
maximum length is 32 bytes.
The remote SNMP engineID. The SNMP engineID is a 12 byte
string represented as hexadecimal numbers separated by the
colon character.
For example, 00:00:00:81:0a:fe:ff:12:97:33:45:12.
Variable that specifies the name of the SNMP group. The
maximum length is 32 bytes.
The security model assigned to the user in user to group
association.
A keyword signifying that an authentication password is
required.
Keyword that specifies authentication protocol, either
HMAC-SHA-96 or MAC-MD5-96.
The privacy password. Valid lengths are 8 - 64 characters.
Avaya P330-ML Layer 2 CLI Commands
205
Advertisement
Table of Contents
