Chapter 3
Avaya P330-ML Layer 3 CLI Commands
network
network-summary
external
show ip ospf interface
User level: user, privileged, supervisor
Use the show ip ospf interface command to display OSPF-related interface
information.
The syntax for this command is:
show ip ospf interface [<interface-name>]
interface-name
Example:
Router-N> show ip ospf interface
There are no OSPF interfaces
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".
show ip ospf neighbor
User level: user, privileged, supervisor
Displays OSPF-neighbor information on a per-interface basis.
The syntax for this command is: show ip ospf neighbor
[<interface-name>] [<neighbor-id>]
interface-name
neighbor-id
256
Displays information only about the network LSAa.
Optional.
Displays information only about the network LSAa
summary. Optional
Displays information only about the external LSAa.
Optional.
The OSPF interface name.
The OSPF interface name.
Neighbor ID.
Avaya P330-ML Reference Guide