Table of Contents
Advertisement
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
priv des56
(Optional)
auth-
password
Example:
P330-N>snmp-server remote-user charles
22:00:00:01:6e:4a:32:22:01 2L2NotifyG3
Done!
snmp-server user
User level: supervisor
Use the snmp-server user command to configure a new SNMP user.
The syntax for this command is:
snmp-server user <username> <groupname> { v1 | v2c | v3 }
[auth {md5 | sha} <auth-password> [priv des56 <priv-
password>]]
username
groupname
v1, v2c, v3
auth
(Optional)
md5, sha
priv-
password
priv des56
(Optional)
auth-
password
206
A keyword signifying that a privacy password is required.
The authentication password. Valid lengths are 8 - 64
characters.
Variable that specifies the name of the SNMP user. The
maximum length is 32 bytes.
Variable that specifies the name of the SNMP group. The
maximum length is 32 bytes.
The security model assigned to the user in user to group
association.
A keyword signifying that an authentication password is
required.
Keyword that specifies authentication protocol, either
HMAC-SHA-96 or MAC-MD5-96.
The privacy password. Valid lengths are 8 - 64 characters.
A keyword signifying that a privacy password is required.
The authentication password. Valid lengths are 8 - 64
characters.
Avaya P330-ML Reference Guide
Advertisement
Table of Contents
