Show Ip Icmp; Show Ip Interface - Avaya P330-ML-ML Reference Manual

show ip icmp

User level: user, privileged, supervisor
Use the show icmp ip command to display the status of ICMP error messages.
The syntax for this command is:
show ip icmp
Example:
Router-N> show ip icmp
ICMP error messages status is ENABLE

show ip interface

User level: user, privileged, supervisor
Use the show ip interface command to display information for an IP interface.
The syntax for this command is:
show ip interface [<interface>]|<vlan>|<IP addr>]
interface
vlan
ip-address
Avaya P330-ML Reference Guide
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
The name of the interface whose information you
want to display.
The name or ID of the VLAN over which there are
interfaces you want to display.
The IP address of the interface whose information
you want to display.
253