Show Spantree - Avaya P330-ML-ML Reference Manual

Output fields:
Field
View Name
Subtree Oid
Subtree Mask
View Type
Storage Type

show spantree

User level: user, privileged, supervisor
Use then show spantree command to display spanning-tree information.
The syntax for this command is:
show spantree [<mod_num>[/<port_num>]]
mod_num
(Optional)
port
(Optional)
Avaya P330-ML Reference Guide
Chapter 2
Description
The name of the view.
The name of a MIB subtree in OID format or as a textname
mapped to a valid OID.
The subtree mask. This can be all ones, all zeros, or a
combination of both.
Status of whether the MIB subtree is included or excluded.
The type of storage used to store the view configuration.
Possible values are:
• nonVolatile – The configuration is saved in non-volatile
memory and is retained after the stack is reset.
• Volatile – The configuration is saved in volatile memory and
is not retained when the stack is reset.
Number of the switch. If you do not specify a number, all
switches are shown.
Number of the port on the switch. If you do not specify a
number, all ports on the specified switch are shown.
Avaya P330-ML Layer 2 CLI Commands
189