Prompt-Length; Reset - Avaya P330-ML-ML Reference Manual

The syntax for this command is:
ping [host[number]]
host
number
Example: to ping the IP address 149.49.48.1 three times:
P330-N>ping 149.49.48.1 3
PING 149.49.48.1: 56 data bytes
64 bytes from 149.49.48.1: icmp_seq=0. time=0. ms
64 bytes from 149.49.48.1: icmp_seq=1. time=0. ms
64 bytes from 149.49.48.1: icmp_seq=2. time=0. ms
----149.49.48.1 PING Statistics----
3 packets transmitted, 3 packets received, 0% packet loss
round-trip (ms)

prompt-length

User level: supervisor
Use the prompt-length command to specify the length of the default CLI
prompt.
The syntax for this command is:
prompt-length <full|<prompt-size>>
full
prompt-
size
Example:
P330-ML-1(super)# prompt-length 4
~r)#

reset

Avaya P330-ML Reference Guide
Chapter 2
Host IP address/Internet address of route destination. If missing,
then the host IP address specified in the last ping command is used.
Number of packets to send. If missing, then the number specified in
the last ping command is used. If the last number is not available, the
default is 4.
min/avg/max = 0/0/0
Display the full length of the prompt
Set the length in characters of the prompt to display
Avaya P330-ML Layer 2 CLI Commands
53