Table of Contents
Advertisement
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
Example:
P330-N>show port vlan-binding-mode
port 2/1 is statically bound
port 2/2 is statically bound
port 2/3 is statically bound
port 2/4 is statically bound
port 2/5 is statically bound
port 2/6 is statically bound
port 2/7 is statically bound
port 2/8 is statically bound
port 2/9 is statically bound
port 2/10 is statically bound
Show powerinline
User level: user, privileged, supervisor
This command applies to P333T-PWR switches only and is used by P330-
ML-ML switches to control P333T-PWR modules in the stack.
Use the show powerinline command to display the current status of the PD
inline power on all ports.
The syntax of this command is:
show powerinline <mod_number [/<port_number>]>
170
Avaya P330-ML Reference Guide
Advertisement
Table of Contents
