Table of Contents
Advertisement
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
The syntax for this command is:
set port dot1x quiet-period <module/port> <seconds>
module/
port
seconds
Example:
P330-1(super)# set port dot1x quiet-period 4/2 300
set port dot1x re-authenticate
User level: supervisor
Use the set port dot1x re-authenticate command to set the port to re-
authenticate.
The syntax for this command is:
set port dot1x re-authenticate <module/port>
module/
port
Example:
P330-1(super)# set port dot1x re-authenticate 1/2
port 1/2 is not in authenticating process
set port dot1x re-authentication
User level: supervisor
Use the set port dot1x re-authentication command to set the re-
authentication mode per port.
The syntax for this command is:
set port dot1x re-authentication <module/port> <mode>
module/
port
mode
88
Module and port number (or range of ports)
Number of seconds – 0 to 65535
Module and port number (or range of ports)
Module and port number (or range of ports)
enable | disable
Avaya P330-ML Reference Guide
Advertisement
Table of Contents
