Table of Contents
Advertisement
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
Example:
P330-N# set logging server 149.49.38.22
Done!
set logging server access-level
User level: privileged, supervisor.
Use the set logging server access-level command to define the access
level associated with Syslog server sink. The user cannot specify an access level
higher than the level assigned to him.
You need to define a logging server using the set logging server
command before you can set the server access level.
The syntax for this command is:
set logging server access-level < admission-level >
<ip-address>
admission-
level
ip-address
Example:
P330-N# set logging server access-level read-only
149.49.38.22
Done!
set logging server condition
User level: privileged, supervisor.
Use the set logging server condition command to define a filter rule for
logging messages to the Syslog server.
You need to define a logging server using the set logging server
command before you can set the server condition.
76
The access level associated with the Syslog server sink.
Possible values are:
• read-only
• read-write
• admin
The IP address of the Syslog server.
Avaya P330-ML Reference Guide
Advertisement
Table of Contents
