Chapter 2
Avaya P330-ML Layer 2 CLI Commands
show port redundancy
User level: user, privileged, supervisor
Use the show port redundancy command to display information about the port
redundancy schemes defined for the switch. The "status" column displays which of
the two redundancy member ports is enabled currently.
The syntax for this command is:
show port redundancy
Example:
P330-N>show port redundancy
Redundancy Name
-----------------
gregory
reuven
meir
arie
Port Redundancy global state is enable
Minimum Time between Switchovers: 1
Switchback interval: 3
show port security
User level: user, privileged, supervisor
Use the show port security command to list the security mode of the ports of a
switch or stack. When no port number is specified, this command displays all the
secured ports in the stack.
The syntax for this command is:
show port security [<module>[/<port>]]
Example:
P330-N>show port security 1
Switch-level security mode disabled
Violation action is restrict and notify
Port
------
1/1
1/2
1/3
...
168
Primary Port
--------------
3/48
3/46
3/1
3/34
Status
---------
enabled
disabled
disabled
Secondary Port
----------------
3/47
3/45
3/2
3/33
Avaya P330-ML Reference Guide
Status
--------
secondary
secondary
primary
secondary