Table of Contents
Advertisement
Chapter 3
Avaya P330-ML Layer 3 CLI Commands
action>
<policy-list-number>
<default-action>
Example:
Router-N(configure)# ip access-default-action 101 default-
action-deny
Done!
ip access-group
User level: privileged, supervisor.
Use the ip access group command to activate a specific policy list.
The syntax for this command is:
ip access-group <policy-list-number> <default-action>
<policy-list-number>
<default-action>
Example:
Router-N(configure)# ip access-group 101
Done!
ip access-list
User level: privileged, supervisor.
Use the ip access list command to create a specific policy rule. The access list
contains several of these rules: each rule pertains to the source IP address, the
destination IP address, the protocol, the protocol ports (if relevant), and to the ACK
bit (if relevant).
Use the no ip access list command to delete a specific rule.
The syntax for this command is:
[no] ip access-list <access-list-number> <access-list-index>
228
integer (100 - 149)
permit|deny
integer (100 - 149)
permit|deny
<command> <protocol> {<source-ip>
<source-wildcard> | any |host
Avaya P330-ML Reference Guide
Advertisement
Table of Contents
