Table of Contents
Advertisement
The syntax for this command is:
Set mac-aging <status>
status
Examples:
P330-N# set mac-aging enable
mac aging is enabled.
P330-N# set mac-aging disable
mac aging is disabled.
set mac-aging-time
User level: privileged, supervisor.
This command is available on the P330-ML-ML switches only.
Use the set mac-aging-time command to set the MAC aging time in minutes.
This is the time after which unused MAC addresses in the MAC table are erased.
The syntax for this command is:
Set mac-aging-time <aging-time>
aging-
time
Example:
P330-N# set mac-aging-time 5
mac aging time is set to 5 minutes.
The entered value is the aging time lower limit. The actual aging time might be
up to three minutes longer.
set port auto-negotiation-flowcontrol-advertisement
User level: privileged, supervisor.
Use the set port auto-negotiation-flowcontrol-advertisement
command to set the flowcontrol advertisement for a Gigabit port when performing
autonegotiation.
The syntax for this command is:
set port auto-negotiation-flowcontrol-advertisement
Avaya P330-ML Reference Guide
Chapter 2
enable / disable
Aging time in minutes (1-3600; default =5).
Avaya P330-ML Layer 2 CLI Commands
83
Advertisement
Table of Contents
