Chapter 2
Avaya P330-ML Layer 2 CLI Commands
show interface
User level: user, privileged, supervisor
Use the show interface command to display information on network interfaces.
The syntax for this command is:
show interface
Example:
P330-N>show interface
Interface Name
----------------
inband
ppp
show intermodule port redundancy
User level: user, privileged, supervisor
Use the show intermodule redundancy command to display the intermodule
rport edundancy entry defined for the stack.
The syntax for this command is:
show intermodule port redundancy
Example:
P330-N>show intermodule port redundancy
Primary-Port
Primary-Port status
Secondary-Port
Secondary-Port status
show internal buffering
User level: user, privileged, supervisor
Use the show internal buffering command to display the size options
(Maximum, Minimum, or Medium) of the Receive (Rx) buffer allocated to each port
of the specified switch.
Internal buffering for the P330-ML-ML switches will always have the value
Not supported. This command is used to display the internal buffering
status for the other P330-ML switches in the stack
138
Status
VLAN
--------------
----
disabled
1
disabled
N/A
: 1/1
: Disable
: 1/2
: Disable
IP address
---------------
---------------
135.64.200.105
255.255.255.0
0.0.0.0
0.0.0.0
Avaya P330-ML Reference Guide
Netmask