show upload status
User level: user, privileged, supervisor
Use the show upload status commands to display the status of the current
configuration file copy process from the device.
The syntax for this command is:
show upload status [<mod_num>]
mod_num
(Optional)
Example:
Router-N> show upload status 1
Module
Source file
Destination file : c:\conf.cfg
Host
Running state
Failure display
Last warning
show vlan
User level: user, privileged, supervisor
Use the show vlan command to display router Layer 3 interfaces.
The syntax for this command is:
show vlan
Example:
Router-N> show vlan
VLAN NAME
---------------- ------- -----------------
Default
terminal
User level: user, privileged, supervisor
Use the terminal width and terminal length commands to set the width
and length of the terminal display in characters.
Avaya P330-ML Reference Guide
Chapter 3
Number of the module. If you do not specify a number, upload
statuses for all modules in the stack are shown.
: 1
: stack-config
: 149.49.36.200
: Executing
: (null)
: No-warning
VLAN ID VLAN MAC
1 02:e0:3b:1d:f9:01
Avaya P330-ML Layer 3 CLI Commands
271