Example:
P330-N# copy startup-config scp c:\config\switch1.cfg 192.168.49.10 5
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show upload status' command
********************************************************************
* If you are currently running the P330-ML Device Manager
application,*
* it is recommended to exit from it before performing configuration*
* download operations.
********************************************************************
copy startup-config tftp
User level: privileged, supervisor.
Use the copy startup-config tftp command to upload the policy and router
startup configurations to a TFTP server.
The syntax for this command is:
copy startup-config tftp <filename> <ip>
filename
ip
Example:
Router-N(super)# copy startup-config tftp c:\P330-
ML\startup.cfg 149.49.100.41
Example: (for Unix):
Router-N(super)# copy startup-config tftp /folder/P330-ML/
startup.cfg 149.49.100.41
copy tftp startup-config
User level: privileged, supervisor.
Copies the policy and router configurations from the saved TFTP file to the Startup
Configuration file in the NVRAM.
Only parameters that differ from the factory default settings for the switch are
Avaya P330-ML Reference Guide
Chapter 3
Destination file name in the tftp server (full path).
The ip address of the tftp server.
Avaya P330-ML Layer 3 CLI Commands
*
221