Chrysler neon 1997 Service Manual page 1626

B-PILLAR
PL
REMOVAL AND INSTALLATION (Continued)
FRONT SHOULDER BELT ADJUSTER
REMOVAL
(1) Remove B-pillar trim.
(2) Remove bolt holding shoulder belt adjuster to
B-pillar (Fig. 66).
(3) Separate shoulder belt adjuster from vehicle.
Fig. 66 Front Shoulder Belt Adjuster
INSTALLATION
Reverse the preceding operation.
REAR SEAT BELT BUCKLE
REMOVAL
(1) Remove rear seat cushion.
(2) Remove rear seat back.
(3) Separate rear seat belt buckle from vehicle.
INSTALLATION
Reverse the preceding operation.
REAR SEAT BELT RETRACTOR
REMOVAL
(1) Remove rear seat cushion and back.
(2) Remove seat belt bezel from parcel shelf cover.
(3) Remove rear seat closure panel silencer pad as
necessary to gain access to retractor.
(4) Remove bolt holding seat belt lower anchor to
floor.
(5) Remove bolt holding retractor to rear seat clo-
sure panel (Fig. 67).
(6) Push seat belt bezel and buckle stab through
access hole in parcel shelf.
(7) From in luggage compartment, separate rear
seat belt retractor from vehicle.
INSTALLATION
Reverse the preceding operation.
SHOULDER BELT ADJUSTER TORX-HEAD SCREW BEZEL LOWER ANCHOR
Fig. 67 Rear Seat Belt Retractor
CARPET
REMOVAL
(1) Remove front seats.
(2) Remove rear seat cushion.
(3) Remove bolts holding front seat belt lower
anchors to floor (Fig. 68).
(4) Remove door sill trim covers.
(5) Remove cowl trim covers.
(6) Remove center floor console.
(7) Remove trunk release assist handle.
(8) Remove lower fasteners from B–pillar trim FLOOR CARPET
FLOOR SILENCERS
panel.
(9) Pull carpet from behind trim panel.
(10) Fold carpet in half toward rear seat.
(11) Remove carpet through rear door opening.
Fig. 68 Carpet
REAR SEAT BELT RETRAC- PARCEL SHELF TOR
BODY 23 - 41
FLOOR PAN