Chrysler neon 1997 Service Manual page 1510

PL
REMOVAL AND INSTALLATION (Continued)
FRONT ENGINE MOUNT
BOLTS
Fig. 37 Bracket Removal
Fig. 38 Front Engine Bracket
(18) Rotate engine clockwise to gain access to con-
verter bolts (Fig. 40). Remove torque converter bolts
(Fig. 41). Mark converter to flex plate for reassembly
ease.
(19) Support transaxle with a transmission jack.
(20) Remove left mount through–bolt (Fig. 42).
Remove left mount bolts from transaxle (Fig. 43).
(21) Remove left transaxle mount from transaxle.
(22) Remove rear engine bolt at transaxle.
TORQUE CONVERTER BOLT
ROTATE ENGINE CLOCKWISE
Fig. 39 Starter Bolts
Fig. 40 Rotate Engine
Fig. 41 Torque Converter Bolts
(23) Carefully work transaxle and torque converter
assembly rearward off engine block dowels. Disen-
gage converter hub from end of crankshaft. Attach a
small C-clamp to edge of bellhousing. This will
TRANSAXLE 21 - 67