Chrysler neon 1997 Service Manual page 1608

START THIS FIRST INNER FRONT DOOR END WEATHERSTRIP BELT
PL
REMOVAL AND INSTALLATION (Continued)
Fig. 12 Front Door Inner Belt Weatherstrip
(3) Separate inner belt stabilizer from door. (Fig.
13)
INSTALLATION
Reverse the preceding operation. Adjust inner belt
stabilizer against glass with enough tension to allow
free up and down movement.
FRONT DOOR GLASS—2 DOOR
REMOVAL
(1) Remove door trim panel and water shield.
(2) Remove inner and outer door belt weather-
strips.
(3) Loosen inner belt stabilizer.
(4) Lower door glass to bottom of travel to access
glass attachment bolts.
(5) Remove bolts holding regulator lift channel to
door glass (Fig. 15).
(6) Remove bolts holding rear guide plate to door
glass (Fig. 14).
(7) Separate rear guide plate from door glass.
(8) Lift door glass upward and out of opening at
top of door (Fig. 16).
(9) Remove front guide plate from door glass.
INNER BELT STABILIZER
Fig. 13
DOOR DOOR GLASS
DOOR
Fig. 15 Regulator Lift Channel
BODY
Fig. 14 Guide Bolts
Fig. 16 Door Glass
23 - 23