Chrysler neon 1997 Service Manual page 1581

HEAVY CORRECTIVE HERE PER DIRECTION OF DYNAMIC ADD SHIMMY AND VIBRATION BALANCE SPOT TIRE OR WHEEL TRAMP, OR EQUIPMENT. OF SPINDLE BALANCING HEAVYSPOT LOCATION WEIGHTS WEIGHT WHEEL WHEEL HOP
22 - 12 TIRES AND WHEELS
REMOVAL AND INSTALLATION
WHEEL COVER (LOCK-ON)
REMOVE
NOTE: When unthreading the wheel cover retaining
nuts (Fig. 10) from the wheel nuts it is recom-
mended that a hand wrench be used and not an
impact wrench. Use of an impact wrench could
OF SPINDLE
Fig. 8 Static Unbalance & Balance
Fig. 9 Dynamic Unbalance & Balance
result in damage to the lock-on wheel cover retain-
ing nuts.
wheel cover to the wheel nuts.
ward from the wheel. This will remove the wheel
cover from the wheel.
CORRECTIVE ADD
(1) Un-thread the 5 nuts (Fig. 10) attaching the
(2) Grasp the wheel cover and pull straight out-
WEIGHTS HERE LOCATION WEIGHT BALANCE
PL