Chrysler neon 1997 Service Manual page 1328

CRANKSHAFT SPEED VEHICLE SENSOR GENERATOR OIL FILTER POWER POSITION SENSOR PRESSURE SWITCH STEERING
PL
DIAGNOSIS AND TESTING (Continued)
(18) Inspect the electrical connector at the crank-
shaft position sensor (Fig. 45).
Fig. 45 Crankshaft Position Sensor
(19) Check the electrical connection at the vehicle
speed sensor (Fig. 46).
Fig. 46 Vehicle Speed Sensor
(20) Check the electrical connection at the power
steering pressure switch on the power steering gear
housing (Fig. 47).
Fig. 47 Power Steering Pressure Switch
AUTOMATIC TRANSAXLE VERTOR TORQUE CLUTCH SOLE- HOUSING
TRANSAXLE
EXTENSION
HOUSING
(21) On vehicles with automatic transaxles, check
the electrical connections at the park/neutral switch
and the torque convertor clutch solenoid (Fig. 48).
Fig. 48 Park/Neutral Switch and Torque Convertor
(22) Inspect the electrical connections at the
upstream and downstream heated oxygen sensors
(Fig. 49) and (Fig. 50).
DOWNSTREAM OXYGEN
Fig. 49 Upstream Heated Oxygen Sensor
Fig. 50 Downstream Heated Oxygen Sensor
NOID CON- EXHAUST MANIFOLD OXYGEN PARK/NEUTRAL SWITCH
FUEL SYSTEM
Clutch Solenoid
CATALYTIC CON- SENSOR VERTOR
SORS SEN-
14 - 41