Chrysler neon 1997 Service Manual page 1541

SPECIAL SPECIAL SPECIAL 5048-4 TOOL TO0L 5048 TOOL 5048
21 - 98 TRANSAXLE
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 197 Position Tool 5048 Over Button and Collets
at Differential Bearing
Fig. 198 Remove Differential Bearing Cone
To install the differential bearing cup and cone on
the ring gear side, use Special Tool 5052, and Special
Tool C-4171.
DIFFERENTIAL RING GEAR
NOTE: The differential is serviced as an assembly.
The only parts that are serviceable within the differ- MOVE SIDE GEAR
ential are the differential bearing cups and cones. If
any other part fails within the differential, you must
DIFFERENTIAL MOVE SIDE GEAR SPECIAL TOOL C-4996
replace the differential assembly along with the
transfer shaft.
CAUTION: Side gear end play must be BETWEEN
0.001 to 0.013 inch.
Fig. 200 Checking Side Gear End Play (Typical)
SIDE GEAR UP AND DOWN C-4996 (NOTE POSI- SPECIAL TION) TOOL
UP AND DOWN ASSEMBLY (NOTE POSITION)
Fig. 199 Checking Side Gear End Play
PL
DIFFERENTIAL DIAL INDICATOR SET ASSEMBLY
DIAL INDICATOR SET