Chrysler neon 1997 Service Manual page 1274

FRONT FASCIA BUMPER REIN- FORCE- MENT
PL
BUMPERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
REMOVAL AND INSTALLATION
FRONT BUMPER FASCIA
FRONT BUMPER REINFORCEMENT . . . . . . . . . 1
REMOVAL AND INSTALLATION
FRONT BUMPER FASCIA
REMOVAL
(1) Remove nuts holding front bumper fascia
bracket to bottom of fender forward of front wheels.
(2) Remove screws holding front fascia to inner
wheelhouse.
(3) Remove bolts holding fascia to bumper rein-
forcement forward of radiator (Fig. 1).
(4) Remove bolts holding fascia to bottom of
bumper reinforcement.
(5) Separate fascia from vehicle.
Fig. 1 Front Bumper Fascia
RADIATOR CLOSURE PANEL FENDER
FRAME AND BUMPERS
CONTENTS
page
BUMPERS
page
. . . . . . . . . . . . . . . . . 1
FRAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
INDEX
REAR BUMPER FASCIA
REAR BUMPER REINFORCEMENT . . . . . . . . . . 2
INSTALLATION
(1) Position fascia on vehicle.
(2) Install bolts holding fascia to bottom of bumper
reinforcement.
(3) Install bolts holding fascia to bumper reinforce-
ment forward of radiator (Fig. 1).
(4) Install screws holding front fascia to inner
wheelhouse.
(5) Install radiator grille, refer to Group 23, Body
for proper procedures.
FRONT BUMPER REINFORCEMENT
REMOVAL
(1) Remove front fascia.
(2) Support bumper reinforcement on a suitable
lifting device.
(3) Remove nuts holding reinforcement to radiator
closure panel (Fig. 2).
(4) Separate bumper reinforcement from vehicle.
INSTALLATION
Reverse the preceding operation.
REAR BUMPER FASCIA
REMOVAL
(1) Release trunk lock and open trunk lid.
(2) Remove bolts holding fascia to tail closure
panel.
(3) Remove push–in fasteners holding fascia to
bottom of rear bumper reinforcement (Fig. 3).
FRAME AND BUMPERS
. . . . . . . . . . . . . . . . . . 1
13 - 1
page
page