Chrysler neon 1997 Service Manual page 1595

23 - 10 BODY
REMOVAL AND INSTALLATION (Continued)
CHILD SEAT MODULE
REMOVAL
(1) Remove rear seat back from vehicle.
(2) Slide lower bolster cushion retainer from chan-
nel on child seat cushion.
(3) Separate lower bolster from seat child seat.
(4) Remove liner from child seat module.
(5) Disengage push-in fasteners holding upper bol-
ster to child seat module above shoulder belts.
(6) Remove screws holding top of child seat module
to seat back frame from behind shoulder belts.
(7) Remove screws holding bottom of child seat
module to seat back frame (Fig. 5).
(8) Separate child seat module from seat back.
INSTALLATION
(1) Place child seat module in position on seat
back.
(2) Install screws to hold bottom of child seat mod-
ule to seat back frame.
CAUTION: Do not
between module and seat back frame when install-
ing upper screws.
(3) Install screws to hold top of child seat module
to seat back frame from behind shoulder belts.
(4) Engage push-in fasteners to hold upper bolster
to child seat module above shoulder belts.
(5) Install liner in child seat module.
(6) Place lower bolster in position on seat child
seat.
capture seat belt webbing
(7) Slide lower bolster cushion retainer into chan-
nel on child seat cushion.
(8) Install rear seat back in vehicle.
Fig. 5 Child Seat Module
PL