Chrysler neon 1997 Service Manual page 1623

B-PILLAR B-PILLAR TRIM
23 - 38 BODY
REMOVAL AND INSTALLATION (Continued)
(2) Align locating pins on backside of cowl trim
panel to mating holes in inner cowl panel.
(3) Push clips on trim panel into slots in inner
cowl panel.
B-PILLAR TRIM—4 DOOR
REMOVAL
(1) Remove bolt holding lower seat belt anchor to
floor pan kick-up.
(2) Remove shoulder belt height control knob.
(3) Remove bolt holding turning loop to belt
adjuster (Fig. 58).
(4) Remove access cover from B-pillar trim.
(5) Disengage clips holding trim to B-pillar.
(6) Feed seat belt turning loop and seat belt
through trim panel.
(7) Separate B-pillar trim from vehicle.
Fig. 58 B-pillar Trim
INSTALLATION
(1) Position B–pillar trim panel near B–pillar.
(2) Feed seat belt turning loop and seat belt
through trim panel.
(3) Align locating pins on backside of trim panel to
mating holes in B–pillar.
(4) Push clips on trim panel into slots in B–pillar.
(5) Install access cover to B-pillar trim.
(6) Install bolt holding turning loop to belt
adjuster.
(7) Install shoulder belt height control knob.
(8) Install bolt holding lower seat belt anchor to
floor pan kick-up.
LOWER ANCHOR BELT ADJUSTER KNOB SHOULDER BELT TURNING LOOP COVER QUARTER PANEL
QUARTER TRIM PANEL—2 DOOR
REMOVAL
(1) Remove rear seat cushion and back.
(2) Slide lower seat belt anchor cover up the web-
bing to expose the belt.
(3) Remove bolt holding lower seat belt anchor to
floor.
(4) Separate seat belt from floor.
(5) Remove screw holding coat hook to top of quar-
ter trim panel.
(6) Disengage hidden clips holding quarter trim
panel to inner quarter panel. (Fig. 59)
(7) Separate trim from quarter panel.
(8) Feed seat belt webbing through access hole in
trim panel.
(9) Separate quarter trim panel from vehicle.
Fig. 59 Quarter Trim Panel
INSTALLATION
(1) Feed seat belt webbing through access hole in
trim panel.
(2) Position trim panel near inner quarter panel.
(3) Align locating pins on backside of trim panel to
mating holes in inner quarter panel.
(4) Push clips on trim panel into slots in inner
quarter panel starting with the clips located near
locating pins.
(5) Install screw holding coat hook to top of quar-
ter trim panel.
(6) Install bolt securing seat belt anchor to floor.
(7) Slide lower seat belt anchor cover down to
cover anchor bolt.
(8) Install rear seat cushion and seat back.
CLIPS SEAT BELT QUARTER PANEL CLIPS TRIM
PL