Chrysler neon 1997 Service Manual page 1327

14 - 40 FUEL SYSTEM
DIAGNOSIS AND TESTING (Continued)
(11) Check the electrical connection to the radiator GROUND
STARTER
MOTOR
fan.
(12) Inspect for corrosion on the electrical connec-
tions at the starter motor solenoid. Check the ground
cable connection below the starter motor (Fig. 40).
Fig. 40 Starter Motor and Ground Strap
(13) Inspect the air cleaner filter element. Replace STARTER MOTOR
as necessary. Check the air induction system for
restrictions.
(14) Check the electrical connection at the knock
sensor (Fig. 41).
Fig. 41 Knock Sensor
(15) Check the electrical connections at the cam-
shaft position sensor and engine coolant temperature
sensor (Fig. 42).
(16) Check the electrical connector at the Elec-
tronic EGR Transducer. Inspect the vacuum and back
pressure hoses at the solenoid and transducer for
leaks (Fig. 43).
(17) Inspect the electrical connections at the gen-
erator (Fig. 44). Check the generator belt for glazing
or damage.
STRAP STARTER SOLENOID
KNOCK SEN- SOR
Fig. 42 Camshaft Position Sensor and Engine
Coolant Temperature Sensor
Fig. 43 Electronic EGR Transducer
Fig. 44 Generator
PL
GENERATOR