Chrysler neon 1997 Service Manual page 1584

PL
REMOVAL AND INSTALLATION (Continued)
nut from wheel cover by pushing or pulling from hole
in wheel cover.
INSTALL
(1) Install retaining nut in hole of wheel cover
with retaining nut flange positioned under the large
retaining flange (Fig. 15).
(2) Push on hex of retaining nut forcing the retain-
ing nut flange past the 2 small retaining tabs in
wheel cover.
TIRES AND WHEELS
SPECIFICATIONS
WHEEL SPECIFICATIONS
Wheel:
Mounting Stud Size . . . . . . . . . . . . . . M12 x 1.5 mm
Mounting Stud Lug Nut Hex Size . . . . . . . . . 19 mm
Mounting Lug Nut Tightening
Torque (4 and 5 Stud Wheels) . . . . . 109–150 N·m
22 - 15
(80 to 110 ft. lbs.)