Chrysler neon 1997 Service Manual page 1594

REAR SEAT BELT REAR SEAT BACK
PL
REMOVAL AND INSTALLATION (Continued)
REAR SEAT BACK
REMOVAL
(1) Remove rear seat cushion.
(2) Remove bolts holding rear seat back and seat
belts to floor.
(3) Push rear seat back upward to disengage hooks
at top of seat back (Fig. 3).
(4) Separate rear seat from vehicle.
Fig. 3 Rear Seat Back
INSTALLATION
(1) Move rear seat back into position in vehicle.
(2) Push seat back downward to engage hooks at
top of seat back.
(3) Install bolts holding rear seat back and seat
belts to floor.
NOTE: The torque specification for the inner seat
belt/rear seat back retaining bolts is 57 N·M (42 ft.
lbs.).
(4) Install rear seat cushion.
HOOK SLOTS CHILD SEAT
CHILD RESTRAINT SEAT BACK
REMOVAL
(1) Remove rear seat cushion.
(2) Open child seat and remove lining.
(3) Remove bolts holding seat back frame to trunk
closure panel through access holes in child seat mod-
ule (Fig. 4).
(4) Remove bolts holding bottom of rear seat back
and seat belts to floor.
(5) Lift seat back upward to disengage retainer
hooks from trunk closure panel.
(6) Separate rear seat back from vehicle.
Fig. 4 Child Restraint Seat Back
INSTALLATION
(1) Move child restraint seat back into position in
vehicle.
(2) Push seat back downward to engage hooks into
trunk closure panel.
(3) Install bolts holding bottom of rear seat back
and seat belts to floor.
(4) Install bolts holding seat back frame to trunk
closure panel through access holes in child seat mod-
ule.
(5) Install child seat lining and close child seat.
(6) Install rear seat cushion.
REAR SEAT BACK TRUNK CLOSURE PANEL
BODY 23 - 9