Chrysler neon 1997 Service Manual page 1517

OUTPUT SHAFT OVERRUNNING SPRING (8) #11 THRUST WASHER CAM ASSEMBLY CLUTCH
21 - 74 TRANSAXLE
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 75 Low/Reverse Band and Strut
Fig. 76 No. 11 Thrust Washer
Fig. 77 Install Overrunning Clutch Rollers and
STRUT LOW-REVERSE BAND #11 THRUST WASHER ROLLER (8)
Springs
TOOL L-4440 SCREWDRIVER SCREWDRIVER HANDLE HANDLE
VALVE BODY RECONDITION
NOTE: Tighten all valve body screws to 5 N·m (40
in. lbs.)
Do not clamp any portion of valve body or transfer
plate in a vise. Any slight distortion of the aluminum
body or transfer plate will result in sticking valves,
excessive leakage, or both. When removing or
installing valves or plugs, slide them in or out
carefully. Do not use force.
NOTE: TAG
REMOVED FOR REASSEMBLY IDENTIFICATION.
Fig. 78 Detent Spring Attaching Screw and Spring
Fig. 79 Using Tool L-4553 on Valve Body Screw
SPECIAL TOOL L-4553 SPECIAL TOOL L-4553 DETENT
ALL SPRINGS AS
SPRING VALVE BODY ASSEM- SCREW BLY
PL
THEY ARE