Chrysler neon 1997 Service Manual page 1461

BENCH FIXTURE GEARTRAIN TRANSAXLE CASE
21 - 18 TRANSAXLE
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 63 Reverse Brake Friction Cone Installation
Fig. 64 Reverse Brake Shim
Fig. 65 Gear Case Half
gear case. Tighten end cover bolts to 29 N·m (21 ft.
lbs.) torque (Fig. 69).
(14) Remove gear case from bench fixture.
BRAKE SHIM REVERSE REVERSE FRICTION CONE BRAKE OUTPUT INPUT AND BEARINGS
(15) Install gear case in a holding fixture with end
cover facing down.
(16) Turn selector shaft into slot on blocker assem-
bly (Fig. 70).
CASE INPUT SHAFT
Fig. 66 Friction Cone Lugs
Fig. 67 Installing Input and Output Bearings
Fig. 68 Snap Rings Retaining Bearings
SPECIAL FRICTION C-4992–1 TOOL CONE LUGS
PL