Chrysler neon 1997 Service Manual page 1490

PL
DIAGNOSIS AND TESTING (Continued)
CONDITION
NO UPSHIFT
3-2 KICKDOWN
RUNAWAY
NO KICKDOWN OR
NORMAL DOWNSHIFT
POSSIBLE CAUSES
1. Hydraulic pressure too low.
2. Valve body malfunction.
3. Low fluid level.
4. Incorrect gearshift linkage adjustment.
5. Incorrect throttle linkage.
6. Governor support seal rings worn.
7. Worn reaction shaft support seal rings.
8. Governor malfunction.
9. Kickdown band, servo or linkage
malfunction.
10. Worn front clutch.
11. Engine performance.
1. Hydraulic pressure too low.
2. Valve body malfunction.
3. Low fluid level.
4. Aerated fluid.
5. Incorrect throttle linkage adjustment.
6. Kickdown band out of adjustment.
7. Governor support seal rings worn.
8.Kickdown band, servo or linkage
malfunction.
9. Worn front clutch.
1. Valve body malfunction.
2. Incorrect throttle linkage adjustment.
3. Governor malfunction.
4. Kickdown band, servo or linkage
malfunction.
Diagnosis Guide
TRANSAXLE
CORRECTION
1. Check fluid pressure at ports.
2. Inspect valve body and repair.
3. Fill trans. to level.
4. Adjust gearshift linkage.
5. Adjust throttle linkage.
6. Replace governor support seal
rings.
7. Replace reaction shaft support seal
rings.
8. Inspect and repair governor.
9. Inpsect and repair kickdown band,
servo or linkage.
10. Replace discs and seals at front
clutch.
11. Set up engine to specs.
1. Check fluid pressure at ports.
2. Inspect valve body and repair.
3. Fill trans. to level.
4. Replace trans. fluid.
5. Adjust throttle linkage.
6. Adjust kickdown band.
7. Replace governor support seal
rings.
8. Inspect and repair kickdown band,
servo or linkage.
9. Replace discs and seals at front
clutch.
1. Inspect valve body and repair.
2. Adjust throttle linkage.
3. Inspect and repair governor.
4. Inspect and repair kickdown band,
servo or linkage.
21 - 47