Chrysler neon 1997 Service Manual page 1538

OIL SEAL STIRRUP STRAP
PL
DISASSEMBLY AND ASSEMBLY (Continued)
(5) Tighten retaining bolts to 23 N·m (200 in. lbs.)
(Fig. 180).
Fig. 180 Tighten Strap Retaining Nuts
(6) Bend tabs of strap up against "flats"of retain-
ing bolts.
DIFFERENTIAL REPAIR
NOTE: The transfer shaft should be removed for
differential repair and bearing turning torque check-
ing.
Fig. 181 Remove Extension Seal
SMALL CHISEL EXTENSION OUTPUT GEAR HOUSING HAMMER DIFFERENTIAL COVER DIFFERENTIAL ASSEMBLY DIFFERENTIAL EXTENSION HOUS- SPECIAL L-4520 (INVERTED) HANDLE C-4171 COVER BOLT ING TOOL
GOVERNOR
PRESSURE
PLUG
Fig. 182 Install New Seal into Extension
Fig. 183 Differential Cover Bolts
Fig. 184 Remove or Install Differential Cover
1/8 INCH BEAD OF R T V DIFFERENTIAL HAMMER SEALANT COVER
TRANSAXLE 21 - 95