Chrysler neon 1997 Service Manual page 1197

SIDESHIELD SCREW(3)
9 - 26 2.0L SOHC ENGINE
REMOVAL AND INSTALLATION (Continued)
Fig. 34 Cylinder Head Tightening Sequence
Fig. 35 Right Inner Splash Shield
(4) Lower vehicle and place a jack under engine.
(5) Remove right engine mount. Refer to procedure
outlined in this section.
(6) Remove right engine mount bracket (Fig. 36).
(7) Remove front timing belt cover (Fig. 37).
INSTALLATION
(1) Install front timing cover.
(2) Install engine mount bracket.
RIGHT FRAME SHIELD PLUG RAIL ACCESS PLUG
(3) Install Right engine mount. Refer to procedure
outlined in this section for installation.
(4) Remove jack from under engine.
(5) Install crankshaft vibration damper Refer to
procedure outlined in this section for installation.
(6) Install accessory drive belts. Refer to Group 7,
Cooling System Accessory Drive section for procedure.
(7) Raise vehicle on hoist and install right inner
splash shield.
ENGINE MOUNT BRACKET TO FASTENERS ENGINE FASTENERS
Fig. 36 Right Engine Mount Bracket
Fig. 37 Timing Belt Cover
INDICATES CLIP LOCATION RETAINING
PL