Chrysler neon 1997 Service Manual page 1624

PL
REMOVAL AND INSTALLATION (Continued)
UPPER QUARTER TRIM—4 DOOR
DOOR OPENING
REMOVAL
(1) Disengage clips holding trim to upper quarter
panel (Fig. 60).
(2) Separate upper trim panel from vehicle.
Fig. 60 Upper Quarter Trim
INSTALLATION
(1) Check to ensure that electric rear window wir-
ing is positioned correctly in the roof channel pro-
vided.
(2) Position trim panel in vehicle.
(3) Align locating pins on backside of trim panel to
mating holes in upper quarter panel.
(4) Push clips on trim panel into slots in upper
quarter panel.
LOWER QUARTER TRIM—4 DOOR
REMOVAL
(1) Remove upper quarter trim panel.
(2) Remove rear seat cushion and back.
(3) Disengage clips holding trim to lower quarter
panel.
(4) Remove seat belt from slot in trim panel.
(5) Separate lower quarter trim from vehicle (Fig.
61).
INSTALLATION
(1) Position lower quarter trim panel to vehicle.
(2) Install seat belt to slot in trim panel.
(3) Align locating pins on backside of trim panel to
mating holes in inner quarter panel.
PARCEL
INNER QUARTER PANEL UPPER QUARTER TRIM
quarter panel.
PARCEL SHELF TRIM
REMOVAL
vehicle.
lower anchors to floor pan.
INSTALLATION
DOOR OPENING LOWER QUARTER TRIM INNER QUARTER
SHELF TRIM
Fig. 61 Lower Quarter Trim—4 Door
(4) Press clips on trim panel into slots in inner
(5) Install rear seat back and cushion.
(6) Install upper quarter trim panel.
(1) Remove upper quarter trim from one side of
(2) Remove rear seat cushion and back.
(3) Remove bolts holding rear seat shoulder belt
(4) Disengage seat belt bezel from parcel shelf.
(5) Separate parcel shelf trim from vehicle.
Fig. 62 Parcel Shelf Trim
Reverse the preceding operation.
PANEL
BODY 23 - 39
PARCEL SHELF