Chrysler neon 1997 Service Manual page 1531

BEARING CUP O" RING SPECIAL
21 - 88 TRANSAXLE
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 144 Install Transfer Shaft Bearing Cone
Fig. 145 Remove Transfer Shaft Bearing Cup
L-4518 TOOL SPECIAL TOOL L-4411 BEARING CONE TRANSFER SHAFT PRESS SHAFT TRANSFER ING RETAINER BEAR- SPECIAL TOOL L-4434 AND ADAPTER C-4658 "O" RING TRANSFER SHAFT GEAR
Fig. 146 Install Transfer Shaft Bearing Cup
DETERMINING SHIM THICKNESS
Shim thickness need be determined only if any of
the following parts are replaced:
• Transaxle case
• Transfer shaft
• Transfer shaft gear
• Transfer shaft bearings
• Governor support retainer
• Transfer shaft bearing retainer
• Retainer snap ring
• Governor support
Refer to Bearing Adjustment Procedure in rear of
this section to determine proper shim thickness.
Fig. 147 Tighten Transfer Shaft Gear Retaining Nut
to 271 N·m (200 ft. lbs.)
SPECIAL TOOL L-4520 HANDLE C-4171 TRANSFER SHAFT BEARING PRESS TORQUE WRENCH RETAINER
PL