TRAN-
SAXLE CASE
END COVER
SNAP RING
END COVER
PLIERS
SNAP
RINGS
21 - 14
TRANSAXLE
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 41 Transaxle Cover Removal
Fig. 42 End Cover
Fig. 43 Snap Rings Retaining Bearings
CAUTION: The oil dams in the input and output
shafts can be damaged while pressing on the
shafts if the bearing fixture is not used properly.
CASE
PRESS RAM
6785 BENCH FIXTURE
BEARING
FIXTURE
BEARING FIXTURE
TRANSAXLE CASE
SHIMS
Fig. 44 Bench Fixture
Fig. 45 Bearing Fixture
(15) Install transaxle gear case into shop press.
Press output and input shaft assemblies out of case
(Fig. 46).
Fig. 46 Pressing Gears Out of Case
BENCH
SAXLE CASE
TRAN-
TRANSAXLE
TURE
FIX-
PL