Chrysler neon 1997 Service Manual page 1474

PL
DISASSEMBLY AND ASSEMBLY (Continued)
LARGER DIAMETER CAGE OUTPUT BEARING INPUT BEARING RING
AXLE SEAL TOOL 6709
Fig. 121 Axle Shaft Seal Removal
Fig. 122 Axle Seal Installation
Fig. 123 Output Roller Bearing
cage is facing outward. Position bearing retaining
strap. Tighten bolts to 11 N·m (96 in. lbs.).
BEARING RETAINER
TOOL C-4171
INPUT BEARING AND SLEEVE
The input bearing is a one–piece bearing and
sleeve unit (Fig. 127). The sleeve is the slide point for
the clutch–release bearing and lever.
REMOVAL
(1) Install tool #6342 over input bearing on the
gear case side of the transaxle clutch housing.
Fig. 124 Output Bearing Strap
Fig. 125 Output Bearing Race Removal
OUTPUT SHAFT BEAR- SPECIAL BEARING OUTPUT TOOL 6787 RACE ING RACE C-3752
TRANSAXLE 21 - 31