Chrysler neon 1997 Service Manual page 1333

AUTOMATIC TRANSAXLE TORQUE VERTOR CLUTCH SOLE- HOUSING CON- NOID POWER PRESSURE SWITCH STEERING
14 - 46 FUEL SYSTEM
DIAGNOSIS AND TESTING (Continued)
(20) Check the electrical connection at the power
steering pressure switch on the power steering gear
housing (Fig. 71).
Fig. 71 Power Steering Pressure Switch
(21) On vehicles with automatic transaxles, check
the electrical connections at the park/neutral switch
and the torque convertor clutch solenoid (Fig. 72).
Fig. 72 Park/Neutral Switch and Torque Convertor
Clutch Solenoid
(22) Inspect the electrical connections at the
upstream and downstream heated oxygen sensors
(Fig. 73) and (Fig. 74).
(23) Inspect the fuel pump module electrical con-
nection at the fuel tank for corrosion or damage (Fig.
75). Check for pinched, kinked or damaged fuel sup-
ply tube.
PARK/NEUTRAL SWITCH DOWNSTREAM OXYGEN CATALYTIC CON- SENSOR VERTOR
ELECTRICAL CON-
NECTOR
Fig. 73 Upstream Heated Oxygen Sensor
Fig. 74 Downstream Heated Oxygen Sensor
Fig. 75 Fuel Pump Module Electrical Connector
EXHAUST MANIFOLD OXYGEN SORS SEN- FUEL LINE
PL