Chrysler neon 1997 Service Manual page 1527

RETURN KICKDOWN L EVER KICKDOWN PISTON ROD GUIDE SPRING O-RING ROD GUIDE PISTON SNAP RING SNAP RING
21 - 84 TRANSAXLE
DISASSEMBLY AND ASSEMBLY (Continued)
ASSEMBLY
To assemble, reverse the above procedure.
KICKDOWN SERVO (CONTROLLED LOAD)-
RECONDITION
DISASSEMBLY
Fig. 122 Kickdown Servo Snap Ring
Fig. 123 Kickdown Servo Rod Guide and Snap Ring
ACCUMULATOR PLATE ACCUMULATOR P LATE SNAP RING PLIERS KICKDOWN SERVO PIS- KICKDOWN PISTON ROD LEVER SEAL RINGS PISTON ROD PISTON RETURN SPRING TON RETURN SPRING KICKDOWN PISTON
Fig. 124 Kickdown Piston Return Spring and Piston
Fig. 125 Controlled Load Kickdown Servo
ASSEMBLY
To assemble, reverse the above procedure.
TRANSFER SHAFT REPAIR
DISASSEMBLY
NOTE: Remove old sealant before applying new
sealant. Use Mopar
when installing cover.
STIRRUP AND STRAP REMOVAL
NOTE: A stirrup and retaining strap is attached to
the transfer gear. The stirrup prevents the transfer
gear retaining nut from turning and backing off the
transfer shaft. The strap is used to hold the stirrup
to the transfer gear and prevent the stirrup retain-
ing bolts from backing out.
O-RING O-RING SNAP RING SNAP RING PISTON ROD GUIDE
RTV sealant, or equivalent,
PL