Chrysler neon 1997 Service Manual page 1331

DUTY PURGE CYCLE SOLENOID VALVE EVAP
IGNITION COIL FAS-
14 - 44 FUEL SYSTEM
DIAGNOSIS AND TESTING (Continued)
(9) Inspect the ignition coil electrical connector.
Ensure the spark plug insulators are firmly seated
over the spark plugs (Fig. 61).
Fig. 61 Ignition Coil and Spark Plugs
(10) Inspect the electrical and hose connections at
the duty cycle purge solenoid (Fig. 62).
Fig. 62 Duty Cycle Purge Solenoid
(11) Check the electrical connection to the radiator
fan.
(12) Inspect for corrosion on the electrical connec-
tions at the starter motor solenoid. Check the ground
cable connection below the starter motor (Fig. 63).
(13) Inspect the air cleaner filter element. Replace
as necessary. Check the air induction system for
restrictions.
ENGINE MOUNT ELECTRICAL CONNECTOR
TENERS
STARTER MOTOR
GROUND
STARTER
MOTOR
Fig. 63 Starter Motor and Ground Strap
(14) Check the electrical connection at the knock
sensor (Fig. 64).
CAMSHAFT POSITION SEN- SOR
Fig. 64 Knock Sensor
(15) Check the electrical connections at the cam-
shaft position sensor (Fig. 65) and engine coolant
temperature sensor (Fig. 66).
Fig. 65 Camshaft Position Sensor
KNOCK SEN SOR
STRAP STARTER SOLENOID
PL